Airport Express Smart DNS Setup Guide
Follow this simple guide to set up UnGeo Smart DNS on your AirPort Express using AirPort Utility.
Before You Start
Before changing your DNS settings, make sure your UnGeo account is active and your current IP address is added in your Client Area. If that is already done, continue with the DNS setup below.
Don’t have an account yet?
Choose a plan and create your UnGeo account before setting up DNS.
Get Started ›Add your current IP address
Add your current IP address in the Client Area to allow UnGeo to work properly.
Register My IP Address ›Once both are done, continue with the DNS setup steps.
Step-by-Step Setup Guide
Open AirPort Utility
On your Mac, open AirPort Utility from Applications → Utilities.
Select Your AirPort Express
Click your AirPort Express base station in the AirPort Utility window.
Open Edit
Click Edit to open the AirPort Express settings.
Open the Internet Tab
Select the Internet tab to view your internet and DNS settings.
Enter Your UnGeo Smart DNS servers
In the DNS Servers fields, enter the UnGeo Smart DNS servers shown in your Client Area.
Save Your Changes
Click Update to save the new DNS settings.
Wait for AirPort Express to Restart
AirPort Express will restart and apply the new DNS settings.
Restart Connected Devices
Restart the devices connected to your AirPort Express so they receive the updated DNS settings.
You’re All Set!
Your AirPort Express network is now ready to use UnGeo Smart DNS.
How to Check If It’s Working
Visit the UnGeo DNS Check page to verify whether your device is using UnGeo Smart DNS correctly.