Panasonic Smart TV Setup Guide

Panasonic Smart TV Smart DNS Setup Guide

Follow this simple guide to set up UnGeo Smart DNS on your Panasonic Smart TV using the built-in network settings.

Panasonic Smart TV Smart DNS setup background

Before You Start

Before changing your DNS settings, make sure your UnGeo account is active and your current IP address is added in your Client Area. If that is already done, continue with the DNS setup below.

Don’t have an account yet?

Choose a plan and create your UnGeo account before setting up DNS.

Get Started ›

Add your current IP address

Add your current IP address in the Client Area to allow UnGeo to work properly.

Once both are done, continue with the DNS setup steps.

Step-by-Step Setup Guide

Open Panasonic TV Settings

Press the Menu, Setup, or Settings button on your Panasonic remote.

Go to Network

Select Network from the settings menu.

Open Network Settings

Select Network Settings or Network Connection, depending on your Panasonic TV model.

Choose Custom Setup

If your TV asks for a setup type, select Custom. This allows you to change DNS settings manually.

Select Your Connection

Choose Wireless or Wired, depending on how your Panasonic Smart TV is connected to the internet.

Open IP Address/DNS Settings

Select IP Address/DNS Settings.

Turn Off Automatic DNS

Find DNS Auto Configuration (DHCP) and set it to Off. On some models, change DNS Settings Mode to Manual.

Enter Your UnGeo Smart DNS servers

Enter the primary UnGeo Smart DNS server from your Client Area in the Primary DNS field. If your TV shows Secondary DNS, enter the secondary UnGeo Smart DNS server as well.

Save Your Changes

Select OK, Save, or Yes to save the new DNS settings.

Run Connection Test

If your Panasonic TV offers a Connection Test, run it to confirm the TV is connected to the internet.

Restart Your Panasonic TV

Turn your Panasonic Smart TV off and back on so the new DNS settings are applied.

You’re All Set!

Your Panasonic Smart TV is now ready to stream your favorite channels with UnGeo Smart DNS.

How to Check If It’s Working

Visit the UnGeo DNS Check page to verify whether your device is using UnGeo Smart DNS correctly.

Go to DNS Check →

Troubleshooting

Open Settings or Setup, then go to Network → Network Settings. On some Panasonic models, the option may be called Network Connection or Manual Setup.

Choose Custom setup first. Panasonic TVs often hide manual DNS fields when the network setup is set to Automatic.

Save the settings after turning DNS Auto Configuration (DHCP) off. If the TV does not save the change, restart the TV and repeat the setup.

No. In most cases, you only need to change the DNS fields. Keep your current IP address, subnet mask, and gateway values unchanged unless your network requires manual settings.

Many Panasonic TVs allow Primary DNS and Secondary DNS. Enter both UnGeo Smart DNS servers shown in your Client Area. If your TV only shows one DNS field, enter the primary server.

Switch DNS back to automatic, reconnect to the internet, then repeat the setup carefully. Make sure only the DNS fields were changed.

Panasonic Smart TVs use different systems depending on the model. Older models often use Viera/My Home Screen menus, while newer models may use Android TV, Google TV, or Fire TV. If your menu is different, use the guide that matches your TV operating system.

Make sure your UnGeo account is active, your current IP address is added in the Client Area, and the UnGeo Smart DNS servers were entered correctly. Then restart your Panasonic Smart TV and reopen the streaming app.

Visit Support Center →

FAQ

Yes. Panasonic Smart TVs can use UnGeo Smart DNS by manually changing the DNS servers in the network settings.

Yes. This guide is suitable for many Panasonic Viera and older Panasonic Smart TV models that include IP Address/DNS Settings.

If your Panasonic TV runs Android TV or Google TV, use the Android TV or Google TV setup guide instead, because the menu structure is different.

No. UnGeo Smart DNS works through your Panasonic TV network settings and does not require an app.

Yes. You can configure UnGeo Smart DNS on either Wi-Fi or Ethernet, depending on how your Panasonic Smart TV is connected to the internet.

No. Usually you only need to change the DNS fields. Keep the current IP address, subnet mask, and gateway values as they are.

Panasonic has used different Smart TV platforms across different models and years. Menu names may vary, but the key setting is usually found under Network Settings or IP Address/DNS Settings.

Some apps depend on your Panasonic TV model, operating system, region, and app store availability. If the app is missing, contact UnGeo support and we’ll help you find the best solution.